Wire & Cable Distributors

Michigan    877 789-1626

Tennessee 877 853-8106 info@fourstarwire.com

STUDIO QUAD MICROPHONE CABLES
In response to demand for the most noise resistant cable possible,we offer our Studio Quad microphone cable. Features include; Neutrik heavy-duty XLR connectors with Gold contacts, and premium
cable with four 24 gauge conductors braided together in a star-quad design for maximum noise rejection and clarity. Surrounded by a 95% braided shield and a tough but flexible matte jacket these cable assemblies deliver superior fidelity and are an excellent choice for
studio or live sound applications.

Part Number Length FSQM- 3 3ft.

Black Chrome shells are available by adding B after the part number.

STAGE SERIES MICROPHONE CABLES

The Stage Series of microphone cables fill the need for a quality assembly that's tough but yet affordable. These workhorses carry a ten year warranty and utilize our heavy duty 24 gauge, 2-conductor, 95% shield wire with quality XLR connectors for a cable that's a
definite notch above Brand X.

Part Number Length FSLM- 3 3ft.



TRANSFORMER EQUIPPED CABLES
BALANCED LINE TO UNBALANCED LINE

These cables will allow a low impedance microphone to be used in any
situation where only high impedance inputs are available, such as
recording equipment, guitar amplifiers, or older high impedance PA
systems.

Part Number Length
FPMT- 10 10ft.
FPMT- 15 15ft.
FPMT- 20 20ft.
FPMT- 25 25ft.

Options include; ìSî for On-Off switch; ìBî for Black Chrome shells.

ANTI-THEFT SERIES MICROPHONE CABLES

This series of specialty microphone cables is recommended for
permanent or semi-permanent installations where loss prevention is a
concern. The Neutrik female connector employs a twist ring which is
locked into place with a set screw to prevent removal of the cable from

the microphone. Available in Black Chrome only, with silver contacts.
Custom lengths available, call for details.

Part Number Length
FPM- 3AT 3ft.
FPM- 5AT 5ft.
FPM- 10AT 10ft.
FPM- 15AT 15ft.
FPM- 20AT 20ft.
FPM- 25AT 25ft.
FPM- 30AT 30ft.


PRO SERIES MICROPHONE CABLES


Our Pro Series microphone cables have been designed to handle the
toughest on-the-road, on stage demands with unsurpassed reliability.
We hand assemble these cables with our best 20 gauge 95% braided
shield 2 conductor wire and Neutrik XLR connectors, to produce a
rugged cable assembly that gives a high level of protection from
outside noise and interference, is extremely flexible, and delivers
premium fidelity. All ends are soldered, sealed and heat shrinked for
durability and longevity.

Part Number & Length FPM- Length.


PRO SERIES SPECIALITY MICROPHONE CABLES
FPM-L SERIES

Our Pro Series microphone cables are available with a Neutrik twist-lock
female connector which greatly reduces the possibility of accidental
disconnects during the sometimes rough handling a microphone takes
during a vigorous performance. These cable assemblies are available with
Nickel shells as standard, with Black Chrome as an option. Gold contacts
are standard.

Part Number Length
FPM-3L 3ft.


ANTI-THEFT SERIES MICROPHONE CABLES

This series of specialty microphone cables is recommended for
permanent or semi-permanent installations where loss prevention is a
concern. The Neutrik female connector employs a twist ring which is
locked into place with a set screw to prevent removal of the cable from
the microphone. Available in Black Chrome only, with silver contacts.
Custom lengths available.

Part Number Length
FPM- 3AT 3ft.


HIGH IMPEDANCE MICROPHONE CABLES


For those using high impedance systems, MyStarSoundÆ offers a
series of microphone cables designed to give the consumer the same
top quality performance as our professional low impedance cables.
Standard wiring for these cables has pin 2 as + (or hot), with optional
pin 3 hot wiring available. Although lengths greater than twenty feet
are not recommended due to signal deterioration, custom lengths are
available.

Part Number Length FPMH- 5 5ft.
Options include: On-Off switch, add  S to part number; Black shell,
add B for pin 3 hot, add X

TRANSFORMER EQUIPPED CABLES
BALANCED LINE TO UNBALANCED LINE

These cables will allow a low impedance microphone to be used in any
situation where only high impedance inputs are available, such as
recording equipment, guitar amplifiers, or older high impedance PA
systems.

Part Number Length FPMT- 10 10ft.
Options include: On-Off switch